Türkçe Products
AVAC YDC Series Y Type Check Valve
Features
» When the flow starts on stem, the disk retracts and allows fluid to pass through the edges of the clamp.
» It can be used in horizontal and vertical position.
» It can be easily installed with its short mounting length and the centering ring located on the body.
AVAC YDC Series Y Type Check Valve -
Download
| General Information |
|
| Model | AVAC-YDC Series |
| Nominal Pressure | PN 63 |
| Temperature Vakues | 0°C - 400 °C |
| Spring Material | AISI 316 |
| Body Material | AISI 304 / AISI 316 |
| Disc Material |
AISI 316 |
| Field of Application | Vapor Hot Water, Cold Water, Acid or Fluids Without Alkaline Properties |
| DN | D | Material | Quantity |
| 1 | Body | ASTM A351 GR.CF8M | 1 |
| 2 | Cap | ASTM A351 GR.CF8M | 1 |
| Spring | Stainless Steel / SS304 | 1 | |
| 4 | Disc | Stainless Steel / SS316 | 1 |
| 5 | Seat | PTFE | 1 |
| 6 | Washer | Stainless Steel / SS304 | 1 |
| 7 | Bolt | Stainless Steel / SS304 | 1 |
| 8 | Cap Sealing Gasket | PTFE | 1 |
CONTACT
Tatlısu Mah. Erkaya Sok. No:1 K:8 D: 15-16 34774 Ümraniye / İstanbul
+90 216 471 82 00
+90 216 471 82 01
info@avaproses.com
+90 216 471 82 00
+90 216 471 82 01
info@avaproses.com
AVA Proses 2016 © All Rights Reserved.
